China best Hole Outputhigh Torque Transmission Mechanical Speed Variator Planetary Speed Reducer Small Gearbox with Good quality

Product Description

Product Description

hole outputhigh torque transmission mechanical speed variator Planetary Speed Reducer small gearbox

HangZhou Fubao Electromechanical Technology Co., Ltd. mechanical speed variator Planetary Speed Reducer small gearbox is a new generation of practical products independently developed by our company:

Low noise: less than 65db.

Low back clearance: up to 3 arc minutes in a CHINAMFG and 5 arc minutes in a double stage.

High torque: higher than the standard planetary reducer torque.

High stability: high strength alloy steel, the whole gear after hardening treatment, not only the surface hard substitution.

High deceleration ratio: Modular design, planetary gearbox can be interlinked.

mechanical speed variator Planetary Speed Reducer small gearbox characteristic:

1.Planetary reducer manufacturer-Fubao Electromechanical Technology adopts an integrated planetary carrier and output shaft, which can provide better torsional rigidity. After precision machining, the gear set is not easy to eccentric, which can reduce interference, reduce wear and noise, and at the same time use a large The bearings are arranged with a wide span to distribute the load of the bearings, and once again strengthen the torque rigidity and radial load capacity of the mechanical speed variator Planetary Speed Reducer small gearbox. The output cover is made of aluminum alloy, which provides better heat dissipation capability for the product, so that the reducer produced by Fubao Electromechanical Technology can play an excellent role in the field of mechanical tools.

2.The planetary gear set is specially made of alloy steel. First, it undergoes quenching and tempering heat treatment to make the material hardness reach HRC30 degrees, and then undergoes nitriding surface treatment to HV860, so that the product has the characteristics of high surface hardness and high toughness in the center, and achieves the best product strength and service life. optimization.

3.The input shaft and the motor output shaft are connected by a bolted structure, with a round shaft seal design, and through dynamic balance analysis, it can ensure that there is no eccentric load at high speeds. After reducing unnecessary radial force, it can effectively Reduce the load on the motor side.

4.The material of the input cover/motor connection seat is made of aluminum alloy, which can provide better heat dissipation effect, and then provide good concentricity and verticality through professional lathe processing, so that the product can be stably combined with various motors, reducing the damage caused by insufficient precision. Unnecessary axial radial force makes the product have a longer life cycle.
 

Compared with other reduction machines, mechanical speed variator Planetary Speed Reducer small gearbox machines have high rigidity, high precision (single stage can be achieved within 1 point), high transmission efficiency (single stage in 97-98%), high torque/volume ratio, lifetime maintenance free and other characteristics.

Because of these characteristics,mechanical speed variator Planetary Speed Reducer small gearbox is mostly installed on the stepper motor and servo motor, used to reduce speed, increase torque, matching inertia.

Product Parameters

WGK series parameters Model number WGK060 WGK085 WGK115 WGK160
Rated output torque 12~40Nm 40~135Nm 90~335Nm 270~900Nm
Reduction ratio L1:3,4,5,7,8,10         L2:12,16,20,25,28,32,35,40,56,64,70
L3:80,100,125,140,160,175,200,250,280,320,350,500,512,700,1000
Planetary gear backlash L1:8arc.min  L2:10arc.min   L3:12arc.min

Detailed Photos

Product Details

Other products

 

Company Profile

HangZhou Fubao Electromechanical Technology Co., Ltd. was established in 2008, the company has a complete precision reducer design, production capacity. Set R & D, manufacturing, assembly and sales, more in the field of gear manufacturing has more than 10 years of background, in the manufacturing equipment is equipped with Switzerland Riesenhahl gear grinding machine, domestic Qinchuan gear grinding machine, hamai gear hobbing machine and domestic Xihu (West Lake) Dis. gear hobbing machine, Japan Yasaki TLGmazak CNC lathe, CNC milling machine and other fully CNC equipment, In addition, it is equipped with other advanced measuring equipment such as Japanese TTI gear detector, 3 coordinate measurement, reducer backlash measurement instrument and so on. In a strong manufacturing capacity at the same time, can be stable, continuous manufacturing of high-quality precision reducer products.

The precision reducer produced by our company has the characteristics of high structural rigidity, small back backlash, precise transmission and so on. It is widely used in various industries. Companies adhering to the concept of let customers participate in manufacturing, and strive to provide customers with more personalized services. In the field of precision transmission has a unique achievements. It is our CHINAMFG pursuit to make far-reaching contributions.

 

Factory Display

FAQ

Q: Speed reducer grease replacement time
A: When sealing appropriate amount of grease and running reducer, the standard replacement time is 20000 hours according to the aging condition of the grease. In addition, when the grease is stained or used in the surrounding temperature condition (above 40ºC), please check the aging and fouling of the grease, and specify the replacement time.

Q: Delivery time
A: Fubao has 2000+ production base, daily output of 1000+ units, standard models within 7 days of delivery.

Q: Reducer selection
A: Fubao provides professional product selection guidance, with higher product matching degree, higher cost performance and higher utilization rate.

Q: Application range of reducer
A: Fubao has a professional research and development team, complete category design, can match any stepping motor, servo motor, more accurate matching.

Shipping Cost:

Estimated freight per unit.



To be negotiated
Application: Motor, Machinery, Agricultural Machinery, Packaging Machinery
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Customization:
Available

|

Customized Request

variator gearbox

How do variator gearboxes ensure efficient power transmission and speed regulation?

Variator gearboxes are designed to ensure efficient power transmission and speed regulation through a combination of mechanical principles and control mechanisms. Here’s how they achieve these objectives:

Efficient Power Transmission:

Variator gearboxes employ various mechanisms to ensure efficient power transmission from the input to the output shaft. These mechanisms minimize energy losses and maximize the transfer of mechanical power. Here are a few key factors that contribute to efficient power transmission:

  1. Optimized Gear Design: Variator gearboxes are engineered with carefully designed gear profiles, tooth shapes, and gear ratios. These design elements help to reduce friction, minimize backlash, and improve the meshing efficiency between the gears. By optimizing the gear design, variator gearboxes can achieve higher power transmission efficiency.
  2. High-Quality Bearings: Variator gearboxes utilize high-quality bearings that reduce friction and allow smooth rotation of the gears and shafts. Well-lubricated bearings minimize energy losses due to friction, thereby improving overall power transmission efficiency.
  3. Lubrication Systems: Proper lubrication is essential for efficient power transmission in variator gearboxes. Lubricants reduce friction and wear between moving components, ensuring smooth operation and minimizing energy losses. Variator gearboxes often incorporate dedicated lubrication systems that deliver lubricants to critical areas, optimizing power transmission efficiency and extending the lifespan of the gearbox.
  4. Material Selection: The choice of materials in variator gearboxes plays a significant role in power transmission efficiency. High-strength and low-friction materials are often used for gears, shafts, and other critical components to minimize energy losses through friction and maximize power transfer.
  5. Minimization of Internal Losses: Variator gearboxes are designed to minimize internal losses caused by factors such as windage, churning, and fluid flow resistance. Streamlined housing designs, efficient cooling systems, and optimized fluid dynamics within the gearbox contribute to reducing these losses, resulting in improved power transmission efficiency.

Speed Regulation:

Variator gearboxes excel in speed regulation by providing precise and adjustable speed control according to the requirements of the application. The following features enable accurate speed regulation:

  1. Continuous Adjustment: Variator gearboxes offer continuous and stepless adjustment of the gear ratio or speed control mechanism. This allows for fine-tuning the output speed to match the specific speed requirements of the application. Continuous adjustment ensures that the desired speed can be precisely achieved, enabling effective speed regulation.
  2. Responsive Control Mechanisms: Variator gearboxes incorporate control mechanisms that respond quickly to speed adjustment inputs. These mechanisms can be mechanical, hydraulic, electronic, or a combination of these. Responsive control systems enable rapid and accurate regulation of the output speed, ensuring precise speed control in real-time.
  3. Wide Speed Range: Variator gearboxes can offer a wide range of achievable speeds, allowing for flexibility in speed regulation. By adjusting the gear ratio or other speed control mechanisms, variator gearboxes can cover a broad range of speed requirements, making them versatile in applications where speed variation is essential.
  4. Stable Speed Maintenance: Variator gearboxes are designed to maintain the selected speed setting with high stability. Once the desired speed is achieved, the gearbox is engineered to minimize speed variations due to external load changes or disturbances. This stability ensures that the output speed remains consistent, contributing to reliable speed regulation.
  5. Feedback and Control Systems: Some variator gearboxes incorporate feedback and control systems that monitor the output speed and adjust the gear ratio or control parameters accordingly. These systems provide closed-loop control, constantly comparing the actual speed with the desired speed, and making adjustments to maintain accurate speed regulation even in the presence of external factors affecting the load or operating conditions.

By incorporating efficient power transmission mechanisms and precise speed regulation features, variator gearboxes can optimize energy transfer and maintain the desired speed levels in a wide range of applications. This enables them to deliver efficient power transmission while offering reliable and adjustable speed regulation.

variator gearbox

How do manufacturers ensure the durability of variator gearboxes in industrial environments?

Manufacturers employ various strategies and techniques to ensure the durability of variator gearboxes in industrial environments. These measures are implemented during the design, construction, and testing stages to enhance the gearbox’s ability to withstand the harsh conditions and rigorous demands of industrial applications. Here’s how manufacturers ensure the durability of variator gearboxes:

Rugged Construction:

Manufacturers use robust and durable materials for constructing variator gearboxes. High-quality metals, such as steel or cast iron, are commonly used for gearbox housings and essential components. These materials possess excellent strength, wear resistance, and thermal stability, enabling the gearbox to withstand heavy loads, vibrations, and temperature variations typically encountered in industrial environments.

Enhanced Gear Design:

The gear design of variator gearboxes is optimized for durability. Manufacturers carefully select gear materials, tooth profiles, and surface treatments to minimize wear, improve load distribution, and enhance the gearbox’s ability to handle torque and shock loads. Advanced manufacturing techniques, such as precision machining and heat treatment processes, are employed to ensure the gears have the required hardness, toughness, and dimensional accuracy for long-lasting performance.

Sealing and Protection:

Variator gearboxes are equipped with effective sealing systems to prevent the ingress of contaminants, such as dust, dirt, and moisture, into the gearbox. Seals, gaskets, and O-rings are used to create a barrier that protects internal components from environmental elements. Additionally, manufacturers often incorporate protective measures, such as breather vents or pressure relief valves, to maintain an appropriate internal pressure and prevent the buildup of excessive heat or pressure that could compromise the gearbox’s durability.

Effective Lubrication:

Proper lubrication is critical for the durability of variator gearboxes. Manufacturers ensure that the gearbox is designed with efficient lubrication systems that provide adequate lubricant flow to all critical components. This lubrication helps reduce friction, dissipate heat, and prevent excessive wear and corrosion. Manufacturers may also specify the use of specific lubricants that are suitable for the operating conditions and requirements of the variator gearbox, further enhancing its durability.

Thorough Testing and Quality Control:

Manufacturers subject variator gearboxes to rigorous testing procedures to validate their durability in industrial environments. These tests may include load testing, endurance testing, temperature cycling, and performance verification. Through comprehensive testing, manufacturers can identify potential weaknesses or design flaws and make necessary improvements to ensure the gearbox’s durability. Additionally, stringent quality control measures are implemented throughout the manufacturing process to maintain consistency and reliability in the production of variator gearboxes.

Compliance with Standards and Regulations:

Manufacturers adhere to industry standards and regulations to ensure the durability and safety of variator gearboxes. Compliance with standards, such as ISO (International Organization for Standardization) and specific industry guidelines, helps manufacturers design and manufacture gearboxes that meet or exceed the required performance and durability criteria. This ensures that the variator gearboxes are suitable for use in industrial environments and can withstand the demanding operating conditions they may encounter.

By employing rugged construction, enhanced gear design, sealing and protection measures, effective lubrication systems, thorough testing and quality control, and compliance with standards and regulations, manufacturers ensure the durability of variator gearboxes in industrial environments. These measures contribute to the reliability, longevity, and performance of variator gearboxes, making them well-suited for demanding industrial applications.

variator gearbox

How do variator gearboxes contribute to continuously adjustable speed control?

Variator gearboxes play a significant role in providing continuously adjustable speed control in mechanical systems. They offer several key features and mechanisms that enable this capability:

  1. Stepless Speed Variation: Variator gearboxes allow for stepless and continuous adjustment of the output speed within a certain range. Unlike traditional gearboxes with fixed gear ratios, variators provide infinite possibilities for speed control. This feature enables precise and fine-tuned speed adjustments, allowing for optimal performance in various applications.
  2. Variable Diameter Pulleys: One common mechanism used in variator gearboxes is the variable diameter pulley system. This system consists of two pulleys connected by a belt. By adjusting the position of the pulleys, the effective diameter of the pulleys changes, altering the speed ratio between the input and output. This variable diameter pulley mechanism enables continuous adjustment of the output speed, providing the basis for continuously adjustable speed control.
  3. Smooth and Continuous Transitions: Variator gearboxes offer smooth and seamless transitions between different output speeds. As the pulley diameters are adjusted, the belt smoothly moves along the pulleys without sudden jumps or changes. This allows for precise and gradual speed control, ensuring smooth operation and minimizing any potential disruptions or vibrations in the mechanical system.
  4. Manual or Automatic Control: Variator gearboxes can be controlled manually or automatically, depending on the specific application. In manual systems, operators can adjust the pulley positions using mechanical or hydraulic mechanisms. Automatic systems, on the other hand, employ computer control or electronic control units (ECUs) to dynamically adjust the pulley positions based on various parameters such as speed, load, or user inputs. This flexibility in control options allows for efficient and convenient speed adjustments in different operating conditions.
  5. Wide Speed Range: Variator gearboxes typically offer a wide range of speed adjustment. The specific speed range depends on the design and capabilities of the gearbox. Some variators can achieve significant speed reductions or increases, allowing for versatile speed control in applications where a wide range of speeds is required.

The continuously adjustable speed control provided by variator gearboxes is beneficial in numerous applications. For example, in vehicles, variators are used in continuously variable transmissions (CVTs) to optimize engine performance and fuel efficiency. In industrial machinery, variators allow for precise control of rotational speeds in processes such as machining, material handling, and conveyor systems. Additionally, variators find applications in power transmission systems, where they enable efficient and flexible speed adjustments in generators, pumps, and other equipment.

In summary, variator gearboxes contribute to continuously adjustable speed control through their stepless speed variation, variable diameter pulley mechanisms, smooth transitions, manual or automatic control options, and wide speed range. These features make variator gearboxes valuable components in achieving precise and efficient speed control in various mechanical systems.

China best Hole Outputhigh Torque Transmission Mechanical Speed Variator Planetary Speed Reducer Small Gearbox   with Good quality China best Hole Outputhigh Torque Transmission Mechanical Speed Variator Planetary Speed Reducer Small Gearbox   with Good quality
editor by CX 2023-09-18