Pipe Threading Q1322 horizontal steel large precision lathe equipment
The major performance attributes:
Big spindle bore and double chuck makes it possible for clamp and procedure large diameter pipes
Integral machine bed adopts high strength iron to relize substantial rigidity and precision
CZPTsonic frequency quenched guide-ways are hard enough for good wear-resistance
Equiped with taper information bar unit this allows the machine to procedure taper threads.
Application:
Q13 series pipe threading lathe machine is mainly utilized for turning the internal and external threads including metric and inch thread,as well as having all the frequent features of typical engine lathe these kinds of as processing the internal bore and finish experience of shafts and disks,this equipment is outfitted with taper guide bar unit which enables this series to procedure taper thread.
This collection lathe equipment is broadly utilised in industries including petroleum exploiting ,coal and minerals mining,chemical piping and geological prospecting,it is substantial-effectiveness tools in processing and repairing drilling pipe,drilling rod,thread coupling and so on.
Normal add-ons:
Resource put up,Tailstock,Chuck,taper guidebook bar,Lights lamp,Coolant pump,Rear assist bracket,Pad iron and many others.
Optional accessories:
Digital readout,Chuck,Faceplate,Chasing dial,Center relaxation,Signal mild,Protecting cover(guide-screw,chuck,tool post),and Grinding attachment and so forth.
Product principal complex parameters:
| Requirements | Unit | Q1313 | Q1319 | Q1322 | |
| Capacity | Swing in excess of mattress | mm | 630/800 | 630/800 | 630/800 |
| Swing over cross slide | mm | 340/540 | 340/540 | 340/540 | |
| Length in between facilities | mm | 1500/3000 | 340/540 | 340/540 | |
| Pipe threading variety | mm | Ø30-126 | Ø50-193 | Ø50-220 | |
| Width of mattress way | mm | 550 | 550 | 550 | |
| Max.load capability | T | 3 | three | 3 | |
| Spindle | Spindle bore | mm | Ø130 | Ø200 | Ø225 |
| Spindle velocity steps | – | FWD. eighteen/REV. 9 | FWD. twelve/REV. six | FWD. 12/REV. six | |
| Spindle speed variety | rpm | twelve-642/19-800 | 24-three hundred/38-384 | 24-300/38-384 | |
| Chuck dimension | mm | 400 | 520 | 520 | |
| Chuck type | – | three-jaw handbook | four-jaw guide | 4-jaw manual | |
| Turret | Turret sort | – | Guide four placement | Guide four position | Manual 4 place |
| Instrument shank dimensions | mm | 32×32 | 32×32 | 32×32 | |
| Turret travel | mm | two hundred | two hundred | 200 | |
| Carriage | X axis feed quality/assortment | mm/r | 22/.02-.45 | 22/.02-.forty five | 22/.02-.forty five |
| Z axis feed quality/variety | mm/r | 26/.07-one.33 | 26/.07-1.33 | 26/.07-one.33 | |
| X axis fast traverse velocity | mm/min | 2300 | 2300 | 2300 | |
| Z axis fast traverse velocity | mm/min | 4000 | 4000 | 4000 | |
| X axis journey | mm | 320 | 320 | 320 | |
| Z axis journey | mm | 1310/2810 | 1310/2810 | 1310/2810 | |
| Tailstock | Tailstock quill diameter | mm | one hundred | a hundred | 100 |
| Tailstock quill taper | – | MT#5 | MT#5 | MT#5 | |
| Tailstock quill journey | mm | 250 | 250 | 250 | |
| CZPT | Major spindle motor | kW | 7.5 | 7.five | seven.five |
| Rapid traverse motor | kW | .three | .3 | .three | |
| Coolant pump motor | kW | .one hundred twenty five | .a hundred twenty five | .one hundred twenty five | |
| Thread | Metric thread grade/variety | mm | 52/1-24 | 24/1-fourteen | 24/1-fourteen |
| Inch thread grade/variety | T.P.I. | 40/2-28 | 40/2-28 | forty/two-28 | |
| Proportions | Width x Height | mm | 1360X1480 | 1360X1555 | 1360X1555 |
| Size | mm | 3657/5157 | 3657/5157 | 3657/5157 | |
| Bodyweight | N.W./G.W. | T | 3.8/4.six | four.two/five.05 | 4.three/five.15 |
